When you go fishing, you need to have a reel with a fishing line on it. And for further convenience, you must learn first how to put fishing line on a reel.
It is not too difficult to do, but there are a few things that you need to know to do it properly.
A fishing line and reel are important pieces of equipment for any fisherman. Both control the mechanism that stores the line and allows the fisherman to control the line as it is released from the reel.
There are various types of reels, but all have one thing in common – they eventually need a new fishing line.
When you are first starting fishing, it can be not very clearly trying to figure out how to put a fishing line on a reel.
We will show you how to do it correctly. In this article, you will find everything related to putting a fishing line on a reel. Let’s get started.
How to Put Fishing Line on a Reel
Depending on the line type, line guide and reel, the process of spooling a new fishing line onto a reel may change. However, there is a common procedure when putting a new fishing line on a reel to make the process go smoothly.
First, remove the old remaining line. Cut the desired line length from the spool, making sure to leave enough extra line to hold onto.
Second, tie a loop in one end of the line using a simple knot like a clinch or half-hitch.
Finally, thread the other end of the line through the guides on the reel and pull it tight. Make sure to keep plenty of tension on the line as you rewind it onto the spool so that it doesn’t get tangled.
Basics of Putting a New Fishing Line on a Reel
When it comes time to put a new fishing line on a reel, there are a few things that you need to know. The first thing is to select the right line type for your reel. Know what are the line guides. Then you need to measure out the correct amount of line. And finally, spool the line according to the type of reel.
1. Fishing line types
Fishing line comes in many types, each with its own advantages and disadvantages. There are three common types of lines – monofilament, braided, and fluorocarbon. Monofilament is the most popular type of line, and it is available in a variety of thicknesses.
A monofilament fishing line is a single strand of nylon. It is popular with anglers for its strength and sensitivity. This fishing line is available in different strengths, depending on the fish you are targeting.
This line is made from a special plastic designed to be nearly invisible in the water. This line makes it perfect for catching skittish fish and tends to avoid traditional bait. The fluorocarbon line is also very strong and can hold up against sharp teeth and powerful jaws.
A braided fishing line is one of the most popular and powerful options because it is strong and durable. This line can be used in salt and freshwater, making it a versatile choice for anglers. Braided line is also less likely to tangle than other types of fishing line, making them easier to use.
2. Line guides for putting on a reel
In simple words, line guides are holes on the rod. A line used to run through the guide to reel and stick straight and untangled with a fishing rod. There are a few different line guides for putting on a reel.
The simplest is the fixed guide, which is just a post sticking out of the side of the reel. The line is then wrapped around this post in a figure-eight pattern. This guide works well with small reels and light lines but can be difficult to use with heavier lines.
Another type of guide is the sliding or adjustable guide. This guide consists of a metal bar that can move up and down within the side of the reel. The line is then wrapped around this bar in a figure-eight pattern. This type of guide works well with both small and large reels, and it can be easily adjusted to fit different line thicknesses.
The final type of guide is the turning or rotating guide. The turning guide is a rotating reel guide consisting of horizontal and vertical metal bars. The line is wrapped around the horizontal bar, which has a channel that allows the line to turn freely as the reel spins.
How to Put Fishing Line on Different Types of Reel
Different fishing reel types are available on the market to cater to different needs. The most popular fishing reels are spinning, spin-cast, and baitcasting reels.
Spinning reels are the most common and widely used reel among beginners. The reason is its simple design and easy user interface. Spincast reels are the easiest to load and unload line.
Spincast is also known as a closed-face reel and is very similar to a baitcasting reel. But some key differences will affect how they’re used.
Baitcasters use a worm or minnow lure to catch fish, while spin-cast reels use a barbell or other object to suspend a fish in the water.
How to put a fishing line on Spinning Reel
- Grab the reel and find out the direction of the reel’s turning.
- Open the bail and remove the leftover line.
- Attach the line and secure it with the spool through the line guides. And closed it.
- After that, crank the reel cautiously while holding the line in the other hand. Check if there is any twist or tangle in line.
- Then fill the spool with the proper amount of line.
- Cut the line and secure it with a lure.
Know spooling a spinning reel in detail with this article on How to spool a spinning reel.
How to put a fishing line on Spincast or Closed-face Reel
- Open the face of your reel and remove the old line.
- Pull the line through the guides carefully.
- Find the reel direction and spool the line in the following direction.
- Crank the line as mentioned above as a spinning reel.
- Cut the line and put the cover back.
How to put a fishing line on Baitcasting Reel
It is almost similar to the spinning reel. Here you have to
- Take the reel. Remove the old line.
- Spool the line on a reel and secure it with an arbor knot.
- Crank it carefully.
- Check if there is any twist or tangle.
- Cut the excess line off.
How Much Fishing Line is Enough to Put on a Fishing Reel
When fishing, it is important to be aware of the amount of line that is on your reel. Too much line can cause your reel to become overloaded and break, while not enough line can make it difficult to cast your lure.
A general guideline is to use between 3 and 6 inches of line per pound of weight on your reel. Beginners should start with around 12 inches of line and advance to 16-18 inches once you are comfortable with the amount.
How Long Does the Fishing Line Last
When it comes to fishing, many people believe that the longer the line, the better. In reality, however, this isn’t always the case.
Fishing lines can last anywhere from a few years, but the average lifespan is around 2 to 3 years for monolines and 7 to 10 for fluorocarbon and braid lines.
If you’re fishing in good conditions and using a quality line, you may get more out of it than that, but in most cases, it’s best to replace your line twice or at least once a year.
Putting a new fishing line on a reel is not as difficult as it may seem. While some steps are almost the same for every type, there are a few unfamiliarities.
But we are confident enough that, after following this detailed guide, you would never make any mistake on how to put a fishing line on a reel. So don’t wait to have a new fishing line on your reel and be ready to start fishing again.
Be careful and patient when winding the new line on, and you’ll be back in business in no time! Best wishes for your fishing!